Epson WorkForce Pro WF-M5799DWF - Moiré (Cross-Hatch) Patterns Appear in the Copied Image; An Image of the Reverse Side of the Original Appears in the Copied Image; The Printout Problem Could Not be Cleared; Other Printing Problems

Related Information
& “Cleaning the Paper Path for Ink Smears” on page 172
& “Cleaning the Scanner Glass” on page 174
& “Cleaning the ADF” on page 172
& “Basic Menu Options for Copying” on page 100
Moiré (Cross-Hatch) Patterns Appear in the Copied Image
Change the reduce and enlarge setting or place the original at a slightly dierent angle.
Related Information
& “Basic Menu Options for Copying” on page 100
An Image of the Reverse Side of the Original Appears in the Copied
Image
❏ For a thin original, place the original on the scanner glass and then place a piece of black paper over it.
❏ Lower the copy density setting on the control panel.
Related Information
& “Basic Menu Options for Copying” on page 100
The Printout Problem Could Not be Cleared
If you have tried all of the solutions and have not solved the problem, try uninstalling and then reinstalling the
printer driver.
Related Information
& “Uninstalling Applications” on page 184
&
“Installing the Latest Applications” on page 181
Other Printing Problems
Printing Is Too Slow
❏ Close any unnecessary applications.
❏ Lower the quality setting. High quality printing slows down the printing speed.
User's Guide
Solving Problems
210