Related Information
& “Placing Originals” on page 35
& “Polling Send/Board” on page 151
& “Checking the Status or Logs for Fax Jobs” on page 154
Various Ways of Sending Faxes
Related Information
&
“Sending Many Pages of a Monochrome Document (Direct Send)” on page 136
&
“Sending a Fax Preferentially (Priority Send)” on page 136
& “Sending Faxes in Monochrome at a Specied Time (Send Fax Later)” on page 137
& “Sending Dierent Size Documents Using ADF (Continuous Scan(ADF))” on page 138
& “Sending a Fax with a Subaddress(SUB) and Password(SID)” on page 138
& “Sending the Same Documents Multiple Times” on page 139
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
1. Place the originals.
2. Select Fax on the home screen.
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap Direct Send to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Related Information
& “Placing Originals” on page 35
& “Sending Faxes Automatically Using the Control Panel” on page 131
& “Fax Settings” on page 146
Sending a Fax Preferentially (Priority Send)
You can send an urgent document ahead of the other faxes waiting to be sent.
User's Guide
Faxing
136
To Next Page
Loading...
