Epson WorkForce Pro WF-M5799DWF - Loading Long Papers; List of Paper Type

❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are pued up with air,
press them down to
atten
them before loading.
❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
❏ Do not use envelopes with adhesive surfaces on the aps or window envelopes.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
Related Information
& “Available Paper and Capacities” on page 25
& “Loading Paper in the Paper Cassette” on page 28
& “Loading Paper in the Rear Paper Feed” on page 31
Loading Long Papers
Only use the rear paper feed to load long paper. Before loading paper in the printer, cut the paper to the size you
want to print. Select User-Dened as the paper size setting.
❏ Make sure the end of the paper is cut perpendicularly. A diagonal cut may cause paper feed problems.
❏ Long paper cannot be held in the output tray. Prepare a box and so on to make sure that paper does not fall on
the
oor.
❏ Do not touch paper that is being fed or ejected. It could injure your hand or cause print quality to decline.
Related Information
& “Available Paper and Capacities” on page 25
& “Loading Paper in the Rear Paper Feed” on page 31
List of Paper Type
To obtain optimum printing results, select the paper type that suits the paper.
Media Name Media Type
Control Panel Printer Driver PostScript Printer
Driver
Epson Universal Printer
Driver
Epson Bright White
Ink Jet Paper
Plain paper Plain paper Plain Plain
User's Guide
Preparing the Printer
34