5. Set the paper source that you want to use on the Basic Settings tab.
6. Set the other items on the Advanced tab as necessary.
For more information on detailed settings, see the menus for Memory Device.
7. Enter the number of copies.
8. Tap
x
to start printing.
9. Remove the memory device from the printer.
Related Information
& “PDF Settings” on page 93
& “TIFF Settings” on page 93
Menu Options for Memory Device
Select Memory Device on the printer's home screen to make various print settings for the le on the memory
device.
JPEG Settings
(Options) :
Make settings for ordering, selecting, and deselecting image data.
Basic Settings:
❏ Paper Setting
Specify the paper source settings which you want to print on.
Advanced:
❏ Layout
Select how to layout the JPEG les. 1-up is for printing one le per sheet. 20-up is for printing 20
les on one sheet. Index is for making index printing with information.
❏ Fit Frame
Select On to crop the image to t into the selected print layout automatically. If the aspect ratio of
the image data and the paper size is dierent, the image is automatically enlarged or reduced so that
the short sides match the short sides of the paper. e long side of the image is cropped if it extends
beyond the long side of the paper. is feature may not work for panorama photos.
❏ Quality
Select Best for higher quality printing, but the printing speed may be slower.
❏ Date
Select the format of the date the photo was taken or saved. e date is not printed for some layouts.
❏ Fix Photo
Select this mode to improve the brightness, contrast, and saturation of the photo automatically. To
turn o automatic improvement, select Enhance O.
User's Guide
Printing
92
To Next Page
Loading...
