Epson WorkForce Pro WF-M5799DWF - Scanning to an Email

❏ Erasing Position
Select the position to remove the punch holes.
❏ Orientation (Original)
Select the orientation of the original.
File Name:
❏ Filename Prex
Enter a prex for the name of the images in alphanumeric characters and symbols.
❏ Add Date
Add the date to the le name.
❏ Add Time
Add the time to the le name.
Scanning to an Email
You can send scanned image les by email directly from the printer through a pre-congured email server.Before
using this feature, you need to congure the email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list rst.
Note:
❏ Before you use this feature, make sure the printer's Date/Time and Tim e Di e r en ce settings are correct. Access the menus
from Settings > General Settings > Basic Settings > Date/Time Settings.
❏ You can check destination before scanning. Select Settings > General Settings > Scan Settings, and then enable Conrm
Recipient.
1.
Place the originals.
Note:
If you want to scan multiple originals or make 2-sided scans, place all of the originals in the ADF.
2. Select Scan on the home screen.
3. Select Email.
4.
Specify the addresses.
❏ To select frequently used addresses: Select the icons displayed on the screen.
❏ To enter the email address manually: Select Keyboard, enter the email address, and then select OK.
❏ To select from the contacts list: Select Contacts, select a contact or a group, and then select Close.
You can search for the address from the contacts list. Enter the search keyword into the box at the top of the
screen.
❏ To select from the history list: Select History, select a contact, and then select Close.
User's Guide
Scanning
113