3. Select Settings from the Scanner list to open the Scanner Settings screen.
4. Click Access Control.
5.
On the Access Control screen, enter the User Name and the Password for an account that has permission to
scan.
6. Click OK.
Scanning Using Epson Scan 2
You can scan using the scanner driver "Epson Scan 2". You can scan originals using detailed settings that are
suitable for text documents.
See the Epson Scan 2 help for an explanation of each setting item.
1. Place the original.
Note:
If you want to scan multiple originals, place them in the ADF.
2.
Start Epson Scan 2.
3. Make the following settings on the Main Settings tab.
❏ Document Source: Select the source where the original is placed.
❏ Scanning Side: Select the side of the original you want to scan when scanning from ADF.
User's Guide
Scanning
125
To Next Page
Loading...
