4. Do you want to turn on sharing between PCs and connect to devices on this network? is displayed, select
the answer suitable to your network place. Select Ye s to save the scanned images to the shared folder.
❏ Select Ye s (private network) when connecting to a home network or oce network.
❏ Select No (public network) when connecting to a public network.
Note:
You can check the network place on the Network and Sharing Center.
Changing the Network Place - Windows 7
Note:
Log on as the administrator.
1. Click the start button, and then select Control Panel.
2. Open Network and Sharing Center.
❏ Category view: Select Network and Internet > Network and Sharing Center.
❏ Small icons view: Click Network and Sharing Center.
3. Click the network place in View your active networks.
4. Set the network place.
❏ Select Home network or Work ne twork when connecting to a home or oce network.
❏ Select Public network when connecting to a public network.
5. Check the content, and then click Close.
Other Scanning Problems
Scanning Speed Is Slow
❏ Lower the resolution, and then scan again. When the resolution is high, scanning may take some time.
❏
e
scanning speed may be reduced depending on the image adjustment features in Epson Scan 2.
❏ On the
Conguration
screen which is displayed by clicking the
button in Epson Scan 2, if you set Quiet
Mode on the Scan tab, the scanning speed may be reduced.
Related Information
&
“Scanning Using Epson Scan 2” on page 125
Cannot Send the Scanned Image by Email
Make sure you have
congured
the email server settings.
User's Guide
Solving Problems
220
To Next Page
Loading...
