Epson WorkForce Pro WF-M5799DWF - Related Information Placing Originals; Checking the Status or Logs for Fax Jobs; Related Information; Place the Originals

Note:
You cannot send your document preferentially while one of the following is in progress because the printer cannot accept
another fax.
❏ Sending a monochrome fax with Direct Send enabled
❏ Sending a color fax
❏ Sending a fax using a connected telephone
❏ Sending a fax sent from the computer
1. Place the originals.
2. Select Fax on the home screen.
3. Specify the recipient.
4. Select the Fax Settings tab, and then tap Priority Send to set this to On.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Related Information
&
“Placing Originals” on page 35
& “Sending Faxes Automatically Using the Control Panel” on page 131
& “Fax Settings” on page 146
& “Checking the Status or Logs for Fax Jobs” on page 154
Sending Faxes in Monochrome at a Specied Time (Send Fax Later)
You can set to send a fax at a specied time. Only monochrome faxes can be sent when the time to send is
specied.
1. Place the originals.
2. Select Fax on the home screen.
3. Specify the recipient.
4.
Make settings to send faxes at a specied time.
A
Select the Fax Settings tab, and then select Send Fax Later
B
Tap Send Fax Later to set this to On.
C
Tap the Time box, enter the time you want to send the fax, and then select OK.
D
Select OK to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
5. Send the fax.
Note:
To cancel the fax, cancel it from
.
User's Guide
Faxing
137