Epson WorkForce Pro WF-M5799DWF - Page 49

Printer Settings
Select the menus on the control panel as described below.
Settings > General Settings > Printer Settings
You cannot change settings that have been locked by your administrator.
Paper Source Settings:
Paper Setting:
Select the paper size and paper type you loaded in the paper sources.
Rear Paper Feed Priority:
Select On to give printing priority to paper loaded in the rear paper feed.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Auto Select Settings:
Select On for any of following settings to automatically print on paper from any sources
containing paper that matches your paper settings.
❏ Copy
❏ Fax
❏ Other
Error Notice:
Select On to display an error message when the selected paper size or type does not match the
loaded paper.
Paper Setup Auto Display:
Select On to display the Paper Setting screen when loading paper in the paper source. If you
disable this feature, you cannot print from an iPhone or iPad using AirPrint.
Printing Language:
Select the printing language for the USB interface or the network interface.
Universal Print Settings:
ese
print settings are applied when you print by an external device without using the printer driver.
Top
Oset
:
Adjust the top margin of the paper.
Left Oset:
Adjust the le margin of the paper.
User's Guide
Preparing the Printer
49