Epson WorkForce WF-7830 Series User Manual

Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 30
The paper is moist or damp.
Solutions
Load new paper.
Static electricity is causing sheets of paper to stick to each other.
Solutions
Fan the paper before loading. If the paper still does not feed, load one sheet of paper at a time.
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper.
& “Available Paper and Capacities” on page 255
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
& “Paper Size and Type Settings” on page 30
Multiple sheets of paper feed at the same time during manual 2-sided printing.
Solutions
Remove any paper that is loaded in the paper source before you reload the paper.
Original Does Not Feed in the ADF
e following causes can be considered.
Originals that are not supported by the ADF are being used.
Solutions
Use originals supported by the ADF.
& “ADF Specications” on page 286
The originals are loaded incorrectly.
Solutions
Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly
144

Epson WorkForce WF-7830 Series Specifications

General

Print Technology	Inkjet
Functions	Print, Copy, Scan, Fax
Print Resolution	4800 x 2400 dpi
Max Print Size	13" x 19"
Duplex Printing	Yes
ADF Capacity	50 sheets
Maximum Scan Area	11.7" x 17"
Fax Speed	33.6 Kbps
Input Tray Capacity	250 sheets
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Display	4.3" color touchscreen
Print Speed Color	12 ppm (ISO)
Scanner Type	Flatbed
Paper Sizes Supported	A4, A5, B5, Legal, Letter
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Print Speed Black	25 ppm (ISO)