Epson XP-452 Series User Manual

Note:
Wi-Fi Direct (Simple AP) connection is a connection method designed to replace Ad Hoc mode.
e printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you
start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the
Wi-Fi is temporarily disconnected.
Related Information
& “Making Wi-Fi Direct (Simple AP) Connection Settings” on page 24
Connecting to a Computer
We recommend using the installer to connect the printer to a computer. You can run the installer using one of the
following methods.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the
soware
disc (only for the models that come with a
soware
disc and users with computers
with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting the Connection Methods
Follow the on-screen instructions until the following screen is displayed, and then select the connection method of
the printer to the computer.
User's Guide
Network Settings
20

Epson XP-452 Series Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Print Speed (Color)	15 ppm
Scanner Type	Flatbed
Maximum Scan Resolution	1200 x 2400 dpi
Functions	Print, Scan, Copy
Paper Tray Capacity	100 sheets
Weight	4.3 kg
Connectivity	Wi-Fi, USB
Paper Sizes Supported	A4, A5, A6, B5, Letter, Legal
Display	LCD
Ink Cartridges	Black, Cyan, Magenta, Yellow
Dimensions (W x D x H)	390 x 300 x 146 mm