Copying
Copying Basics
1. Load paper in the printer.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l
or
r
button, and then press the OK button.
4.
Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
l
or
r
button.
6. Select Print Settings using the
d
button, and then press the OK button. Check the settings such as the paper
size and the paper type and change settings if necessary. Select the setting items using the
u
or
d
button and
change settings using the
l
or
r
button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as the
Reduce/Enlarge setting and press the OK button. en specify a percentage using the – or + button. You can change the
percentage in increments of 10% by holding down the – or + button.
7. Press the
x
button.
Note:
e color, size, and border of the copied image are slightly dierent from the original.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 39
& “Placing Originals on the Scanner Glass” on page 43
& “Menu Options for Copy Mode” on page 75
Menu Options for Copy Mode
Note:
Available menus vary depending on the layout you selected.
The number of copies
Enter the number of copies.
Color
Copies the original in color.
User's Guide
Copying
75
To Next Page
Loading...
Need help?
General
