EasyManua.ls Logo

Ercogener GenPro 425e - Warning

Ercogener GenPro 425e
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EG_GenPro425e_1103_UG_001_UK.docx
Page 7 / 51
Descriptions and non-contractual illustrations in this document are given as an indication only.
ercogener reserves the right to make any modifications.
Dct_427_02
Warning
The GenPro 425e is dedicated to 'Machine To Machine' (M2M) applications only.
ercogener recommends the use of SIM card subscriptions of the 'Machine To Machine'
(M2M) type.
ercogener recommends to read carefully all documents linked to the product GenPro 425e (User
Guide, Application Notes, Command List) that can be download on our website www.ercogener.com.
ercogener cannot be held responsible for:
- The problems due to an inappropriate use of the GenPro 425e.
- The problems due to a wrong configuration.
- The problems due to a wrong use of an embedded software application developed or supplied by a
third party.
- The dysfunctions due to the absence, a bad coverage or termination of the GSM, GPRS, UMTS and
LTE networks services.
- The dysfunctions if the product is used for the watching of physical persons where human life is
engaged.
ercogener reserves the right to modify the functions of its products "GenPro 425e " and "EasePro",
"EaseIP", "EaseNTRIP" without previous notice.
- To avoid any risk of electrocution, do not open the casing.
- For any functioning, the casing must be closed.
- No internal part can be repaired by the user. The GenPro 425e must be returned to the factory for any
repair with RMA request (Return Material Authorization).
- The GenPro 425e must be placed in a normally ventilated area, out of sources of heat.
- In order to guarantee the electromagnetic compatibility, the length of the serial cable, the power supply
cable and the inputs/outputs cable must not exceed 3 meters.
- The GenPro 425e must not be connected directly to the mains supply (230 V
AC
). A PS1 (max 15W) voltage
adapter must be used.
This marking on the product, accessories, packaging or literature indicates that the product
and its electronic accessories (e.g. cable etc.) should not be disposed of with other household
waste.

Table of Contents

Other manuals for Ercogener GenPro 425e

Related product manuals