ergoline ergoselect 100 User Manual

- 13 -
mountinG the Control terminal (P or K)
The control terminal can be installed with the display
either facing the patient or the operator.
It is recommended to install the terminal with the display
and control keys towards the operator and the speed
display towards the patient.
ConneCtinG the Power CorD
Set the handlebar to the front upper position and secure.
Tilt the ergoselect carefully towards you until it rests on
the handlebar.
assembly position of the ergoselect ergometer
different orientations of the control terminal
Caution
• Equipment Damage •
Before connecting the ergometer to the power line, check that
the line voltage corresponds to the ratings on the type plate.
The type plate is located on the back of the ergometer, at the
bottom.

ergoline ergoselect 100 Specifications

General

Brand	ergoline
Model	ergoselect 100
Category	Exercise Bike
Language	English