ergoline ergoselect 100 User Manual

- 51 -
teChniCal sPeCifiCations
erGometer
Model modular ergometer system ergoselect
models ergoselect 100 P / K, ergoselect 200P / K
Operating Mode continuous operation
Power 100 ‑ 240 V / 50 ‑ 60 Hz (60 VA max.)
specication power cord US:
SJT 2xAWG16 125 V / 10 A
„hospital“ or „ hospital grade“
specication internal backup battery:
IEC: CR 2032 / 3 V 230 mAh
Braking Principle computer‑controlled eddy current brake
with torque measurement;
speed independent to DIN VDE 0750‑0238
Load Range 6 ‑ 999 watts, speed independent
(see diagrams)
Speed Range 30 to 130 RPM
Deviation of Measured Load to DIN VDE 0750‑0238
Load Increments user programmable
Internal Protocols Control Terminal P:
• 5 xed incremental exercise test protocols (e.g. WHO)
• 10 user‑programmable protocols
• manual load control
Control Terminal K:
• 5 xed incremental exercise test protocols (e.g. WHO)
• 10 user‑programmable protocols
• manual load control
• 4 xed test protocols (e.g. PWC)
• 10 user‑programmable training protocols
Permitted Patient Weight 160 kg
Saddle Height Adjustment continuous, for patients between 120 cm and 210 cm
ergoselect 100: manual adjustment of saddle height
ergoselect 200: electrical adjustment of saddle height
with digital readout
Handlebar Adjustment for patient heights between 120 cm and 210 cm
continuous handlebar adjustment over 360°
ergoselect 100: rigid steering column
ergoselect 200: height‑adjustable steering column
Crank Length 170 mm (cranks with adjustable length are optional
accessories)

ergoline ergoselect 100 Specifications

General

Brand	ergoline
Model	ergoselect 100
Category	Exercise Bike
Language	English