ergoline ergoselect 100 - Maintenance Checks; Technical Safety Inspections

- 50 -
maintenanCe
CheCKs Before eaCh use
Before each use, visually inspect the device for signs of
damage.
If you detect damages or impaired functions which may
result in a hazard to the patient or the operator, the device
must be repaired before it can be used again.
teChniCal safety insPeCtions anD
teChniCal insPeCtions of the measurinG system
The technical safety inspections and the inspections of
the measuring system must be completed every two years
according to the rules of the art by a Service Engineer
authorized by ergoline.
Similarly, the automatic sphygmomanometer in the control
terminal must be checked and calibrated by an authorized
specialist every two years to fulll legal requirements.
The date of the next inspection is indicated on the
inspection sticker attached next to the type plate on the
ergometer.
DisPosal
The product described in this operator manual must not
be disposed as unsorted municipal waste and must be col‑
lected separately.
Please contact an authorized representative of the manu‑
facturer for information concerning the decommissioning
of your equipment.