Need help?Do you have a question about the ergoline ergoselect 100 and is the answer not in the manual?
General| Brand | ergoline |
|---|---|
| Model | ergoselect 100 |
| Category | Exercise Bike |
| Language | English |
Warns against using the device in areas with explosion hazards.
Warns about direct sunlight, outdoor use, humidity, and proximity to power plants.
Addresses leakage currents and connection to compliant electrical installations.
Warns against BP measurements on specific patients and potential hematomas.
Details how to place and level the ergometer on the floor.
Guides on connecting the power supply cable to the ergometer.
Instructions for connecting the blood pressure cuff and microphone.
Details manual and electric adjustments for saddle and handlebar height and angle.
Covers cuff size, microphone position, and application for BP measurement.
Describes the available operating modes: PC Mode, Ergometry, Manual, and Settings.
Details how to operate the ergometer via an external PC or ECG system.
Describes how to run automatic exercise tests and select protocols.
Instructions on how to end an exercise test and enter the recovery phase.
Describes how the user manually controls load, stage times, and BP measurements.
Explains how to access and modify device settings.
Explains how to set the EKG type for communication with external devices.
Guides on powering on the ergometer and the initial self-test.
Describes the available operating modes: PC Mode, Ergometry, Training, Test, Manual, and Settings.
Details how to operate the ergometer via an external PC or ECG system.
Describes how to run automatic exercise tests and select protocols.
Details adjustments like load, hold, and ending the test or phase.
Describes how the user manually controls load, stage times, and BP measurements.
Describes setting up and running cardiologic training sessions.
Explains how to load and save training protocols using a chip card.
Guides on selecting the default operating mode upon startup.
Explains how to set up user-programmable protocols for Terminal K.
To Next Page
