ergoline ergoselect 100 - Terminating an Ergometry Test

- 25 -
+5W  -5W
terminatinG an exerCise test
The exercise phase can be terminated manually at any time
with the RECOVERY key.
The load will immediately be reduced to 25 watts, but a
higher or lower value can be selected manually.
It is recommended that the patient continues to pedal in
the recovery phase.
The END key in the middle will terminate the test.
 End
Note
• The saddle height (ergoselect 200) can be changed during
an exercise test.
• To reactivate the saddle height adjustment function, press
and the arrow keys will again be displayed.
• Additional blood pressure measurements can be initiated
with .
recovery phase