ergoline ergoselect 100 - Setting Date and Time (Terminal K); Configuring Training Protocols (Terminal K)

- 44 -
↑
↓
↑
↓
↑
↓
Date/time
To begin with, you select DATE or TIME and conrm the
selection.
Then the value displayed in reverse video can be edited
with the ↑↓ keys and saved with SELECT.
The time is set in the same way.
You exit the conguration with .
traininG
Ten training protocols consisting of warmup, training and
recovery phase are user‑congurable. Depending on the
selected training mode (pulse, constant, interval), there will
be dierent parameters to dene for the training phase:
First of all you select and conrm the protocol you wish to
congure.
Then you select the parameters with the arrow keys (↑↓)
as usual and edit them.
setting the date
Date/Time
Date
 22.08.2007
Time
 17:33:51
  
Select
Choosefunction
changing the date
Date/Time
Date
 22.08.2007
Time
 17:33:51
  
Select
Choosefunction
selecting the exercise test protocol to edit
Training
1. Pulse
2. Constant
3. Interval
4. Interval
5. Pulse
6. Pulse
7. Pulse
8. Pulse
9. Pulse 
Select
10. Pulse
Choosefunction