How to fix ERT Medical Equipment SpiroSphere Sensor that does not start?
If the ERT Medical Equipment SpiroSphere Sensor does not start, press the power button for at least 3 seconds to switch it on. If it still doesn't start, place it in the charging cradle for at least 10 minutes, and then try again.
What to do if ERT Medical Equipment SpiroSphere Sensor can't be paired?
If the ERT Medical Equipment SpiroSphere Sensor can't be paired, first switch it on. If it is already in the charging cradle, remove it and then re-insert it. This will put the sensor into pairing mode for 90 seconds.
Why is my ERT Medical Equipment SpiroSphere Sensor is not charging?
If the ERT Medical Equipment SpiroSphere Sensor is not charging, ensure the power supply is connected to the SpiroSphere Main Unit, as the sensor will only charge when the main unit is powered. Also, check if the sensor is correctly inserted in the cradle. If it's fully discharged, place it in the cradle, wait a few minutes, and then try powering it on by pressing the power button for more than 3 seconds.
How to fix ERT Medical Equipment SpiroSphere Main Unit that does not start?
If the ERT Medical Equipment SpiroSphere Main Unit does not start, try switching it on by pressing the power button for at least 3 seconds. If that doesn't work, connect the power supply and let it charge for a few minutes. You can also try waking it up using the touch screen or power button.
What to do if ERT Medical Equipment SpiroSphere Main Unit is not responding?
If the ERT Medical Equipment SpiroSphere Main Unit is not responding, try touching the Home icon in the top left corner. If that doesn't work, restart the Main Unit by pressing the Power button for 3 seconds and using the restart option in the Shutdown Menu. As a last resort, press the power button for more than 8 seconds to switch off the unit, then restart it by pressing the power button for at least 3 seconds.
What to do if orange LED is blinking slowly on ERT Medical Equipment?
If the orange LED is blinking slowly on your ERT Medical Equipment, it means the battery is low. Put the SpiroSphere Sensor into the cradle of the Main Unit to resolve this.
Why is the orange LED blinking fast on my ERT SpiroSphere Medical Equipment?
If the orange LED is blinking fast on your ERT Medical Equipment, this indicates an error in the SpiroSphere Sensor.
What to do if blue LED is off on ERT Medical Equipment?
If the blue LED is off on your ERT Medical Equipment, the device might be in sleep mode. To resolve this, put the device into the charging dock or press the Power On switch.
General| Category | Medical Equipment |
|---|---|
| Manufacturer | ERT |
| Type | Spirometer |
| Storage Temperature | -20°C to 60°C |
| Measurement Parameters | FVC, FEV1, PEF |
| Connectivity | USB |
| Battery Life | Up to 8 hours |
| Storage Humidity | 10% to 95% RH (non-condensing) |
| Standards Compliance | ISO 26782, ISO 23747 |
To Next Page
