Page 20
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
(33) 01 34 11 50 00 (33) 01 34 11 50 10
Web : www.ervor.com - Email : info@ervor.com
Manual G06
Edition: 10/2015 - rev A
7 - C - 4 - STARTING PROCEDURE
Air compressor :
) Check the storage oil is drained and replaced by recommended oil.
) Check oil level.
Coupling :
) Check distance between coupling plates, tightness and alignment.
) Check the coupling guard is correctly installed.
Driving :
Electric motor :
) Check the electric motor circuit breaker protection has appropriate adjustment.
) Check the direction of rotation.
) Check the power supply.
Combustion engine :
) Check oil and fuel level.
!
CHECK THAT THE VOLTAGE SUPPLY IS IN ACCORDANCE
WITH THE ELECTRIC MOTOR VOLTAGE.
) Check that the engine is out of gear.
To Next Page
Loading...