Page 21
Manual G06
Edition: 10/2015 - rev A
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
(33) 01 34 11 50 00 (33) 01 34 11 50 10
Web : www.ervor.com - Email : info@ervor.com
8 - SAFETY INSTRUCTIONS
ONLY QUALIFIED PERSONNEL WHO ARE CONVERSANT WITH THE
INSTRUCTIONS IN THIS MANUAL SHOULD OPERATE AND/OR MAKE
ADJUSTMENTS TO THE COMPRESSOR AND ELECTRIC MOTOR.
Before any adjustments :
) Stop the compressor.
) Cut off the power supply.
) Ensure power supply cannot be re-established accidentally.
) Isolate the compressor from the air network by closing the compressed air delivery isolating
valve.
) Vent the compressor.
) Wait a few minutes for the compressor's internal pressure to equal atmospheric pressure.
BEFORE ANY MAINTENANCE OPERATION ALL INSTRUCTIONS
DESCRIBED IN THIS CHAPTER MUST BE FOLLOWED CAREFULLY.
!
!
To Next Page
Loading...