ESAB Rustler EM 280C PRO - ECO Design Information

3  TECHNICAL DATA
0463 930 001
- 11 -
© ESAB AB 2023
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration by solid
objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased electrical
hazard.
3.1 ECO design information
The equipment has been designed in order to be compliant with the Directive 2009/125/EC and the
Regulation 2019/1784/EU.
Efficiency and idle power consumption:
Name Idle power Efficency when max power
consumption
EM280CPRO 30W 89%
EM350CPRO 30W 89%
EM280CPROSYNERGIC 30W 89%
The value of efficiency and consumption in idle state have been measured by method and conditions
defined in the product standard EN 60974-1.
Manufacturer’s name, product name, serial number and date of production can be read from rating
plate.
1. Product name
2. Manufacturer's name and address
3. Serial number
3A. Manufacturing location code
3B. Revision level (last digit of year and week number)
3C. Year & week produced (last two digits of year and week number)
3D. Sequential number system (each week starts with 0001)