Warranty Repair and Annual Servicing:
Warranty repair work must be carried out by a recognised gas fire technician. It is recommended
that recognised Escea Gas Fire Technicians are also used to carry out annual servicing requirements
(particularly during the warranty period). For contact details of recognised Escea Gas Fire Technicians
in your area, or for replacement parts, please contact the retailer from whom the appliance was
purchased.
The heater must be installed according to these instructions and in compliance with all relevant:
building, gas fitting, electrical and other statutory regulations (eg. AS/NZS 5601). Any shortcomings
in the appliance installation will be the responsibility of the installer, and Escea will not be accountable
for any such failings or their consequences.
Manufactured by: Escea Ltd, PO Box 5277 Dunedin NZ, Ph: +64 3 478 8220.
For contact details of your local Escea distributor or dealer in New Zealand, please visit: www.escea.
com or email: info@escea.com.
From Australia, please visit www.escea.com.au, call AU: 1800 460 832 or WA: 1800 730 140, or
email us at info@escea.com
EF5000 PRODUCT SPECIFICATION
MODEL NAME EF5000
Description of Appliance Outdoor Gas Fire Heater
A/NZ Approval No. AS/NZS 5263.1.3:2016
Gas Type Natural Propane ULPG
Gas input 49 MJ/hr 40 MJ/hr 40 MJ/hr
Inlet Pressure
Max 5 kPa 5 kPa 5 kPa
Min 1.0 kPa 2.5 kPa 2.5 kPa
Operating Pressure on High 1.0 kPa 2.0 kPa 2.2 kPa
Burner Jet Size
Front: 4.0mm
Rear: 4.0mm
Front: 1.3mm
Rear: 1.3mm
Front: 1.25mm
Rear: 1.25mm
Burner Aeration
Front: 5mm x 2
Rear: 5mm x 2
Front: 11mm x 2
Rear: 11mm x 2
Front: 11mm x 2
Rear: 11mm x 2
Pilot injector 0.45mm 0.30mm 0.30mm
Appliance Dimensions (mm)
Width 1000 mm
Height 579 mm
Depth 320 mm
To Next Page
Loading...
