Escea EF5000 - Product Description and Installation Process; A1 Product Description; A2 Recommended Install Process; A3 Product Dimensions

B
A C D E F G SERVICE
6
A
Product Description and Installation Process
A1 Product Description
The Escea EF5000 outdoor gas fire is an open fronted flame eect fire that is designed to be
permanently installed into a cavity. The appliance may be installed directly into a timber cavity and
requires no flue. The user will control the fire from a switch that is situated on the lower right hand side
of the stainless steel fascia.
A2 Recommended Install Process
The sequence in which you choose to do these tasks will vary depending on your individual scenario.
Please read these instructions fully before proceeding with the installation.
Create the Cavity Install electrical / gas connections
and replace
Finish installation
and t fascia
Section B Section C, D, E Section F
A3 Product Dimensions
NOT TO BE MISTAKEN FOR CAVITY DIMENSIONS
All dimensions are in mm.
For more detail, view architectural drawings at www.escea.com or www.escea.com.au