Page 19
PROGRAMMING VIA
TELEPHONE
Allows you to customise the gateway according to your requirements.
Programming can be carried out locally via a MF telephone.
You can programme:
voltage of telephone line;
use mode;
inter-digit dialling time;
CLIP/CLIR settings;
roaming service settings;
provider's voicemail service deactivation;
notifications telephone number;
administrator telephone number ;
programming-mode password;
battery check;
external power failure control;
relay-based notification of external power failure;
relay-based notification of GSM/UMTS network loss;
automatic converter of selected telephone number;
receiver gain adjustment;
transmitter gain adjustment;
relay settings.
Note: during programming, the inter-digit dialling time must
not exceed 10 seconds. Once 10 seconds has elapsed
without digits you will hear the dissuasion tone and
you will have to hang up.