Page 44
SERVICES
INCOMING CALLS
Allows you to answer incoming calls.
Upon receiving a phone call, the LED indicating the line status (white)
will blink shortly 4 times every 4 seconds as described at chapter
“Signals” (see page 60) and the telephone will be ringing.
Pick up the handset;
The LED indicating the line status (white) and the LED indicating the
device status (red) will turn on and the communication with the calling
party will be set up.
OUTGOING CALLS
Allows you to dial over the UMTS/GSM network.
If 3G.next gateway is connected to a PABX, please refer to the
switchboard’s manual.
If 3G.next gateway is connected to a telephone:
Pick up the handset.
The LED indicating the line status (white) will turn on and the dialling
tone will be heard.
Dial the telephone number to be called.
When the called party answers, the LED indicating the device status (red)
will turn on.
Note: once you have dialled the number, you can either
press # to send the number immediately, or you can
wait for the call to be automatically forwarded once
the inter-digit dialling time has elapsed (by default 5
seconds).
To Next Page