Essilor Instruments ALM 800 User Manual

4
5
Save the measurement values in memory by pressing the Memory/Add switch after measurement.
In case of setting [Auto Memory] on the [Setup] screen as [On], the measurement
values are automatically stored in memory after the message [Marking OK] appears.
Switch the lens from right to left and place the lens in a manner similar to (1).
Switch the measurement to the left lens by touching
In case of measuring PD with the setting of PD Measure [On], the right eye and left eye are switched
automatically.
The measurement of the lens can be started from either right or left.
In case that the measurement values of both right and left are stored, the values on
the selected side are deleted by touching .
The color of the measurement value area is changed, and the measurement values are fixed.>
At this time, the measurement values of the right lens remain on the screen.>
USER MANUAL > MEASUREMENT
ALM800 - Auto lensmeter > V1 - 05-2020 40

Essilor Instruments ALM 800 Specifications

General

Brand	Essilor Instruments
Model	ALM 800
Category	Measuring Instruments
Language	English