4
2
1
Store the ADD value of the near point (near-sight segment) in memory by pressing the Memory/Add
switch. The color of the Add value is reversed after storing it.
In case of trifocal lens, display “Ad2” by pressing the Memory/Add switch one more time. After that,
repeat (3) and (4) after bringing the second near point (near-sight segment) to the center of the lens
stand.
5. Measurement of progressive lens
Take a measurement of progressive lens.
Set [Auto Prog.] and [ADD Measure].
[Auto Prog.] [ADD Measure]
[Off]: No auto judgment for a progressive
lens
[On]: Auto judgment for a progressive lens
[F/N.AT]: Auto memory of far and near points
[N.AT]: Auto memory of near point
[Manual]: Manual memory of far and near
points
USER MANUAL > MEASUREMENT
43 ALM800 - Auto lensmeter > V1 - 05-2020
To Next Page
Loading...
Need help?
General
