2
3
4
Place the tips of the marking pens on the lens surface softly.
Do not mark several times at the same point.
The marking pen may be worn out quickly.
Release the finger after marking.
The marking lever returns to the initial position.
Avoid the followings since they may damage the tips of the marking pens.
Perform marking roughly
Operate the marking lever without a lens set
Touch a tip of the marking pen during cleaning
4. Printer
The measurement values can be printed out by touching
after taking a measurements.
USER MANUAL > OPERATING INSTRUCTIONS OF DEVICE
ALM800 - Auto lensmeter > V1 - 05-2020
18
To Next Page
Loading...
Need help?
General
