Essilor Instruments ALM 800 User Manual

2
3
4
1
2
Select the characters with
and enter them with .
In case of changing the characters, move the cursor to the one changed by pressing
with holding the Memory/Add switch.
Return to [ID] screen and select the character to be input with and enter them
with
.
How to delete
In case of deleting the characters, move the cursor to the one deleted with
.
Then, press
.
It is possible to select and enter the characters with touching directly.
d
. [Data Output] screen
This screen is to set the communication parameter for outputting the measurement values to the externally
connected PC etc.
The measurement values and data created on the [ID] screen are output by selecting [RS232C] or [Both] of
[Data Output] on the [Setup] screen.
The output content is same with the one of the printout.
However, the graph at the time of progressive lens measurement is not output.
Any changes made will overwrite the original characters.>
T
he cursor in moves by pressing the arrows.
>
The maximum number of characters is 44 (22 characters X 2 lines).>
T
he cursor in moves while the Memory/ADD switch is held
>
USER MANUAL > BEFORE MEASUREMENT
29 ALM800 - Auto lensmeter > V1 - 05-2020

Essilor Instruments ALM 800 Specifications

General

Brand	Essilor Instruments
Model	ALM 800
Category	Measuring Instruments
Language	English