Essilor Instruments ALM 800 User Manual

Measurement range
Sphere (S) -25D to +25D Step: 0.01/0.12/0.25D
Cylinder (C) 0 to ±10D Step: 0.01/0.12/0.25D
Axis angle (A) 0 to 180° Step: 1°
Addition (Add) 0 to +10D Step: 0.01/0.12/0.25D
Prism 0 to 10Δ Step: 0.01/0.12/0.25D
Measurement lens
Unprocessed lens
(diameter: 100mm)
Eyeglass processed lens
Single lens, multifocal lens, progressive lens
Hard contact lens
Soft contact lens
Accompanying lens stand is required
Measurement wavelenght 525 nm
UV cut percentage
measurement wavelength
375 nm (UV-A)
UV cut percentage
0 〜 100 ％
BV cut percentage
measurement wavelength
425nm
BV cut percentage
16 〜 100 ％
CB transmittance
measurement wavelength
470nm
CB transmittance
0 〜 100 ％
UV transmission 0 to 100% (-25D to +25D)
UV transmission
measurement wavelenght
375 nm (UV-A)
PD measurement 45 to 85 mm (0.5 mm step)
Power rating
100 to 240V
50/60 Hz
Power consumption 40 VA
Printer Thermal printer (paper width: 58mm)
Monitor Color LCD monitor (5.7 inches)
Size / Weight
Environmental condition of
use
(W)
170 mm
(D) 205 mm
(H) 438 mm
400 mm when the monitor is stored
Approx. 4.3 kg
Environmental condition of
use
Temperature range: 5°C to 40°C
Humidity range: 30 to 95% HR (No dew condensation allowed)
USER MANUAL > SPECIFICATIONS
67 ALM800 - Auto lensmeter > V1 - 05-2020

Essilor Instruments ALM 800 Specifications

General

Brand	Essilor Instruments
Model	ALM 800
Category	Measuring Instruments
Language	English