Essilor Instruments ALM 800 User Manual

1
2
3
1. Auto memory
This device has the function to store the measurement values in memory automatically when the alignment is
achieved, and the message [Marking OK] is displayed at the time of the measurements of single focal lens,
multifocal lens and contact lens.
Move the cursor to [Auto Memory] with or .
Select [On] with .
Return to the measurement switch with after the settings or changes are completed.
1. Alignement mark
2. Cross cursor
2. Power saving
The power saving function is activated if no switches are operated or no measurement values are updated with
the power on. The switching time to the power saving mode can be set on [Standby] of the [Setup] screen.
While this function is activated, the power to the measurement light and LCD monitor is turned off.
It returns to the measurement mode by pressing any switch.
The measurement values are stored in memory automatically when the message [Marking OK] appears
after the alignment mark and cross cursor overlap as shown on the right.
>
USER MANUAL > OTHER FUNCTIONS
57 ALM800 - Auto lensmeter > V1 - 05-2020

Essilor Instruments ALM 800 Specifications

General

Brand	Essilor Instruments
Model	ALM 800
Category	Measuring Instruments
Language	English