1
[Setup] screen - Page 4/4
1. [Date/Time]
Switches to [Date/Time] screen
2. [Lens mode]
Selects the lens measurement mode:
[Lab]: Switching the lens which is selected single lens→ eyeglass right lens→ eyeglass left lens
[ECP]: Switching the lens which is selected eyeglass right lens → eyeglass left lens
Refer to [Lab/ECP mode].
3. [Prism center]
Selects the Prism center measurement:
[Off]
[On]
Refer to [ Prism center screen].
4. [Default Setting]
Displays thesetup items changed from default and changes the setting back to the default by pressing
.
c. [ID] screen
This screen is to create the data for printing out the distributor's name or message on the printout.
Select [ID] screen.
USER MANUAL > BEFORE MEASUREMENT
ALM800 - Auto lensmeter > V1 - 05-2020 28
To Next Page
Loading...
