Essilor TESS User Manual

User Manual

Essilor TESS Specifications

General

Brand	Essilor
Model	TESS
Category	GPS
Language	English

Summary

I. INTRODUCTION

2. Warning

Safety rules for using electrical equipment, handling, maintenance, and operator responsibilities to prevent risks.

II. PRECAUTIONS REQUIRED

2. Environment

3. Electrical installation

Details power supply, grounding, and protection against electrical interference for safe operation.

III. INSTALLATION

2. Unpacking of the product

3. Connections

Details how to connect the tracer to a computer or an Essilor edger using various ports.

3.a. Connection to a computer

3.b. Connection to an Essilor edger (Delta T, Jess, JessIE, JessD)

3.c. Login with a Delta 2 edger

6. Connection configuration

6.a. Configuration of protocols

IV. CHECK PRO

1. Installation

Steps for installing the Check Pro software from the provided CD-ROM.

2. Instructions for use

Guide on launching the Check Pro application and navigating its main screen and icons.

2.a. PC Configuration

2.e. Calibration test

Procedure for performing a calibration test using the Check Pro software to ensure precision.

2.f. Calibration

Detailed steps for performing a full calibration of the tracer using the Check Pro software.

V. USE OF THE TRACER

2. Tracing

Procedures for assigning job numbers, working on current jobs, and using barcodes for tracing.

3. Frame tracing

General section for frame tracing procedures.

3.a. Standard tracing

Detailed steps for performing standard tracing of frames, including side selection and value entry.

3.b. Groove detection

3.c. Groove acquisition settings

VI. AUTO-MAINTENANCE

1. Calibration test

Procedure for performing a calibration inspection to maintain high precision performance.

2. Calibration

Detailed steps for performing a complete calibration process using pattern and frame gauges.

3. Autotest:

VIII. ERROR CODES & BARCODES

1. Error codes