2
1
Machine shutdown.
Press on the pushbutton for approximately 1 second, then release:
> The display indicates:
> Press on ( ) to stop the power-down process.
> Press on to confirm the power-down process.
By pressing the pushbutton for too long you will force the device to turn off. This action will cause a warning message to
appear the next time the machine is started.
d. Packing of the device
To pack the tracer:
Turn off the device.
It is also possible to use:
the barcodes below:
it is also possible to put it manually in parking position using marks:
two horizontal arrows for the position rotation: they must be aligned,
a vertical arrow for the output position: this arrow must be aligned with the left stud of the back jaw.
Position the plate and insert the two screws.
The device is put automatically into parking position.>
To Next Page
Loading...