Need help?Do you have a question about the Essilor e-Tess and is the answer not in the manual?
Details safe placement, environmental conditions, and electrical specifications for the tracer.
Explains device symbols and outlines proper cleaning methods to maintain performance.
Provides an overview of the tracer's capabilities and technical specifications.
Details how to connect the tracer to a computer and an edger using various ports.
Guides users through initial setup, main screen elements, and basic navigation principles.
Explains how to personalise the tracer's display parameters for tracing jobs.
Describes how to access and modify the tracer's core configuration settings.
Covers setting the device language and configuring connection parameters like serial ports.
Step-by-step guide for installing the Essilor Check Pro software on a PC.
How to access and interpret usage statistics and view error messages via the software.
Setting up the Check Pro software on the PC and accessing version details.
Performing self-tests, calibration checks, and full calibration procedures.
Overview of tracer components and the initialisation process upon power-up.
Covers standard tracing, special cycles like "Precal" and "Very High Curve" tracing.
Guides on tracing frames with small B-dimensions and patterns or demonstration lenses.
How to retrieve stored jobs and modify traced frame shapes.
In-depth explanation of the shape alteration function and its methods.
Instructions for performing regular calibration checks and full calibration.
How to run self-tests for tracer movement and view usage statistics.
Accessing error logs and calibrating the touch screen interface.
Steps to export calibration data or error lists to a USB stick for analysis.
Procedures for adding frame standards and updating the tracer's software.
To Next Page
General