Essilor e-Tess - Tracing Specific Frame Types

Essilor E-Tess Tracer
4- Using the e-Tess tracer
30
2.4. Start tracing
,
2.5. Enter the bridge value on the numeric keypad, then validate,
2.6. Position the frame to trace the other eye,
2.7. Start tracing again.
3. "Very small B-dimension" tracing
This type of tracing is suitable for frames with B-dimension ≤ 19 mm.
3.1. Position the accessory as shown below:
3.2. Perform your trace according to the description given in chapter 3.3.
4. Pattern/demonstration lens tracing
4.1. Position your pattern on the pattern holder between
the adapter and the magnet. Press the top part of the
holder to separate the jaws of the adapter holder and
simplify handling.
Blocking of the
eye to be traced
between the
clamping jaws
Opposite eye
resting on the high
curve wedge.
1
11
1
2
22
2
-1- Rest
-2- Adapter insertion