Essilor e-Tess - 2. Installation; Introduction and Technical Characteristics

Essilor E-Tess Tracer
3- Check Pro 8
2. INSTALLATION
2.1. INTRODUCTION
Technical Characteristics
- Power up with the tracer on/off switch.
- Compliant with standard ISO 16284 (OMA 3.04 compatible).
- Automatic self-test on power up.
- Calibration, linked to the computer (PC) or from the tracer.
- Cycle counter available on the software installed on the PC.
- Automatic feeler insertion.
- 3-D tracing for frames, 2-D tracing for patterns, pre-cut lenses and demo lenses.
- The "remote edging" precision will only be guaranteed on closed frames.
- High precision tracing with reading of the frame groove profile.
- Holder provided to trace a pattern or lens (demonstration or pre-cut).
- Automatic measurement of the frame bridge, binocular tracing.
- Frame thickness measurement.
- Differential tightening of the grips.
- RS232 and RJ45 ports.
- Memory update by Essilor external USB stick.
- Internal memory: 1000 Jobs.
- 5.7" touch screen.
- Tracer inclination 0° or 10°.
- Built-in auto-maintenance functions, from the computer (PC).
- Shape modification function.
- Power supply voltage: 12 V
.
- External power supply: 100-240 VAC, 1 A, 50-60 Hz, Output 12 V .
- Frame dimension limits:
 B-dimension min. 17 mm (pattern: 18.5 mm), max. 58 mm.
 A-dimension min. 28 mm, max. 70 mm.
 Limit Z height: 30 mm in binocular, 40 mm in monocular.
 Frame thickness: min. 1.45 mm, max. 12 mm.
- Dimensions: (L) 280 mm x (D) 285 mm x (H) 180 mm.
- Weight: 7.5 kg.
N.B.: As improvements are made these specifications may be changed without prior notice.