Essilor e-Tess - General Safety Warnings

Essilor E-Tess Tracer
Warning 5
WARNING
In order to reduce the risks associated with the use of electrical equipment - fire, electric shock, injury,
etc., it is essential to comply with the basic safety rules.
We therefore strongly recommend that you read this manual before switching on your Essilor e-Tess
tracer and that you keep it in a safe place for future reference.
The mechanical and electronic adjustments and the electrical servicing must be performed by an after-
sales service technician approved by Essilor.
To ensure that you operate your tracer in complete safety, we recommend that you comply with the
following instructions :
- Your workbench must be clean, free of clutter, and illuminated sufficiently to allow you to work in
safety.
- Do not use your tracer in the presence of inflammable liquids or gases.
- Check the mains cable periodically. If damaged, it must be replaced by an approved repairer.
- Keep the cable well away from heat sources, sharp objects and oily substances.
- Never pull on the cable in order to unplug it from the mains supply.
- Before connecting your tracer to the mains supply, make sure that the switch is in the Off position:
"0”.
- If the mains switches are no longer performing their “ON/OFF” function, stop using your tracer at
once. Faulty switches should be replaced by an approved technician.
- When the equipment is not to be used for an extended period, or before carrying out any
maintenance, and/or when replacing certain accessories, it is imperative that you disconnect your
tracer from the electric mains supply.
- Your tracer is a professional tool whose use is reserved for specialist and responsible operators.
Use by anyone other than these operators should be strictly forbidden.
- Before using your tracer, check that it is operating correctly, and make sure that it is performing its
function correctly.
- The use and operation of any accessory other that those recommended in this manual may pose
hazards for the operators using the product.
- Do not use your tracer for any purposes other than those described in this document.
- Your tracer should be carefully maintained, in accordance with the detailed instructions in this
document.
- Your tracer is an electrical device which conforms to the appropriate safety rules. If it malfunctions,
any repair operations must be performed by a qualified technician approved by Essilor. Otherwise,
the user’s safety could be at risk.