2
1
2. Unpacking of the product
a. Reception of the product
Check the general state of the cardboard box It should not present any marks of shock or trauma. If so, contest the
transporter’s usage restrictions.
Position the cardboard box: the two arrows on the box must be directed upwards.
Open the box at the top and take out the accessories first.
Take out the product with its two foam supports.
Remove the foam supports.
Save all the packaging for possible re-use.
b. Unbinding of the device
Before any use, it is that you remove the transport stabilizing system.REQUIRED
To do this:
Remove the two screws holding the stabilizing plate.
Remove the stabilizing shim (save these two screws as well as the shim for possible re-use).
c. Turning on and off the product
Turning on the product
Press on the pushbutton for approximately 1 second, then release:
> The display indicates:
> At the end of powering up, the tracer is working.
To Next Page
Loading...
Need help?
General
