EST Centurion WS - Technical Support

This chapter contains information necessary to run diagnostics on
the EST Analytical Centurion W and W/S.
The purpose of this Chapter is to familiarize the user with the various integrated diagnostic
functions.
The Centurion W and W/S will require minimal maintenance or use of consumable items such as
tubing, ferrules and valves. The interval at which maintenance is required depends on
autosampler use and sample type.
In order to maintain the safety integrity provided by the instrument for parts containing liquids,
during maintenance, ONLY use replacement parts provided by EST Analytical.
CAUTION: Before Performing any Maintenance or Servicing any component
of the Centurion WS, the instrument must be:
 Turned off (NOTE: Windows must be turned off properly.)
 Disconnected from the power supply
 Hot Surfaces must be given time to cool
 After servicing instrument, all covers need to be placed back on the instrument.
ATTENTION: Avant d'effectuer des travaux d'entretien ou toute composante
du Centurion WS, l'instrument doit être:
• Eteint (REMARQUE: Windows doit être éteint correctement.)
• déconnecté de l'alimentation
• Surfaces chaudes faut donner le temps de refroidir
• Après instrument entretien, tous les couvercles doivent être placés sur
l'instrument.
4.1 Technical Support
To ask technical questions or to obtain technical service please contact EST Analytical:
 Within the United States call toll free: (800) 283-3510
 Outside of the United States call: Regional Authorized Distributor.
Before calling for technical assistance or service:
 Note the serial number of the instrument.
 Note the type of problem you are experiencing and the conditions under which the
problem occurred.
 Note the exact wording of the error message (if applicable).
 Please have the compact disc manual open and available.