Appendix B--Installation of a Centurion WS to an OI4660
Concentrator
1. Unpack the Centurion as instructed in Chapter 2 of this manual.
2. Install all the lines and communication cables to the Centurion as Instructed in Chapter 2.
3. Set up the water reservoir as instructed in Chapter 2.
4. Water Line connection to OI4660:
Connect the water line to the sample valve on the concentrator.
5. Soil Line connection to OI4660:
Connect the heated soil line to the mount in the oven bracket
of the OI4660.