Etatron eSelect B2 - Light Signs; Keyboard

9
SET 1 active
SET 2 active
4.3. LIGHT SIGNS
4.4. KEYBOARD
Meter : Used to select the type of measurement “METER 1, 2 or 3”
ESC : Comes one step back in the programming procedure.
Minus symbol : Decreases numbers and defines functions within specific
programming menus. E.g.: when selecting the type of measurement allows the
user to shift between pH, Rx and Chlorine.
Plus symbol : Increases numbers and defines functions within specific
programming menus. E.g.: when selecting the type of measurement allows the
user to shift between pH, Rx and Chlorine.
Shift right : Used to select the digit to modify when setting passwords.
Used to change Language also.
OK : Allows the user to proceed by confirming the selections made.