Etatron eSelect B2 - Expert Menu Mode

15
MENU SETUP 1/2
MENU MODE EXPERT
METER TYPE pH
T SENSOR NONE
SET TEMPERATURE 25
CALIBRATION MENU TIMEOUT 05:00
DELAY AT STARTUP 00:05
AUX OUTPUT MODE OFF
YEAR 2013
MONTH 5
DAY 15
HOUR 14
MENU SETUP 2/2
MINUTE 52
SET PASSWORD 0 0 0 0 0 0
SET DEFAULTS NO
 MENU MODE: SIMPLE or EXPERT
 YEAR: put the current YEAR
 MONTH: put the current MONTH
 DAY: put the current DAY
 HOUR: put the current HOUR
 MINUTE: put the current MINUTE
7.3.2. EXPERT MENU MODE
It permits to set the following parameters by use :
 MENU MODE: SIMPLE or EXPERT
 METER TYPE: pH, Rx, Cl 20ppm,Cl 2ppm, Cl 200ppm, Cl 2000ppm
 TSENSOR: NONE or PT100
 SET TEMPERATURE: put the current TEMPERATURE is PT100 is not setted
 CALIBRATION MENU TIMEOUT: set the TIMEOUT time for CALIBRATION procedure
 DELAY STARTUP: set the startup DELAY TIME for the instrument
 AUX OUTPUT MODE: set OFF or CLEANING or FLOCCULANT
 YEAR: put the current YEAR
 MONTH: put the current MONTH
 DAY: put the current DAY
 HOUR: put the current HOUR
 MINUTE: put the current MINUTE
 SET PASSWORD: put the password if it is necessary to have it
 SET DEFAULTS: set NO or MAINTAIN CALIBRATION or RESTORE ALL