ETC Source 4WRD II - Introduction

Source 4WRD II Installation and User Manual 1
Introduction
The Source 4WRDII LED is a replacement for a standard Source Four
burner assembly. It converts the HPL source to a white-light LED and
provides a significant reduction in power consumption.
The Source 4WRDII LED retrofit kit is available in 80 CRI, 90 CRI (Gallery),
and 90 CRI Daylight (Gallery) variants.
Retrofit kit,
shown installed
on a Source Four
fixture body
Note: The Source 4WRDII LED retrofit kit is not compatible with
Source Four LED, Fresnel, PAR, PARNel, or jr fixtures.