ETC Source 4WRD II - Default Chapter; Table of Contents

Table of Contents
Source 4WRD II Installation and User Manual i
Introduction
1
Help from ETC Technical Services
2
Safety
3
Retrofit the Fixture
6
Wire the Power Connector
6
Remove Incandescent Lamp Housing
7
Install the Source 4WRD II Retrofit
8
Install the Fixture
10
Attach Hanging Clamp and Safety Cable
10
Connect Cables
11
Configure the Fixture
14
RDMValues
14
Focus the Fixture
15
Set the Z-adjustment
15
Adjust the Yoke Position
16
Shape the Beam
17