Euphonix System 5 Installation Guide System 5 Overview
18
Table 1-4 Summary of System 5 Components
Component Function Number Notes
CM401T
Master Module
These two modules make up the center section
of the S5 console.
Ethernet devices. CM40
1T includes
TB Mic and expansion port for TB
external switches wiring.
CM402T Expanded
Channel Module
CM403 Powered
Console Module
Allows installation of joystick panner panel and
film monitor panel.
optional Ethernet device
CM408T
8-channel Module
Contains 8 physical faders that control two lay-
ers of 8 inputs.
1 required Ethernet device
CM409HTP Track
Panner Module
Half-width console section with trackball panner
.
optional
Serial device
1 required
TT002
Ma
Housed in the SC264 System Computer.
chine control Interface; GPIO controller;
MC524
Monitor Interface
Analog monitor output controller 1 required
TCC connection to SC263.
1 MA703 is required (standard).
ML530
Mic/Line Interface
24 remote-control mic preamps
7 max
1 AM713 is required per ML530
SC263/SC264
System Computer
Master system computer. Configures DF66.
1 required
Ethernet device. Connects to control
room display monitor, keyboard, and
trackball. Connects to MC524 and up
DF66
Performs all system DSP
1 required
Changeover Switch
MADI routing hub for Failover System.
AM713
Analog to MADI
Converter
Provides 24 Analog to MADI Converters, a
Aux Digital Input (AES/EBU or
1 required for
each ML530
specified.
Requires digital sync reference.
MA703
MADI to Analog
Converter
Provides 24 MADI to Analog Converters, a
Aux Digital Output (AES/EBU or
, and 2 Aux Analog Outputs.
1 required for
the MC524.
Requires digital sync reference.
DM714
AES/EBU to MADI
Converter
Provides 24 AES/EBU to MADI Converters, a
dual-channel Aux Digital Input (AES/EBU or
, and 2 Aux Analog Inputs.
Optional
Requires digital sync reference.
MD704
MADI to AES/EBU
Converter
Provides 24 MADI to AES/EBU Converters, a
dual-channel Aux Digital Output (AES/EBU or
S/PDIF), and 2 Aux Analog Outputs.
Optional
Requires digital sync reference.
Optional
Requires digital sync reference.
FC726
Digital Format
Converter
Provides 56 channels of format converted inputs
and outputs (112 channels total). Supports
MADI, AES/EBU, T-DIF, ADAT Optical, S-DIF2,
ProDigi.
a
SuperCore
Ethernet device. Requires digital
sync reference.
Optional
Ethernet device.
S/PDIF)
dual-channel
S/PDIF)
dual-channel
S/PDIF), and 2 Aux Analog Inputs.
CM411
VGA Input Module
VGA flat display inside module; can be
configured with joysticks.
optional
VGA display device with serial port
option for joysticks.
CM401T is
required.
Video sync recommended for 9-pin
operation.
Optional 75-ohm BNC AES/EBU
connectors.
Optional 75-ohm BNC AES/EBU
connectors.
CO600
Controls MC524, ML530, and integrated DAWs.
Houses the TT002 machine and GPIO controller.
SC263 is used for broadcast.
to 7 ML530s via TCC.
Modular I/O
Provides up to 64 channels of format converted
inputs and outputs. Supports MADI, AES/EBU,
Analog, remote-control mic preamps, HD/SD
embedders/de-embedders.
Optional
Requires digital sync reference and
ethernet connection for remote mic
preamps and 8 ch embedder/de-
embedder.
The following chart summarizes this section: