Page 18/84
December 2019W11/W12/W13 | Operation manual
Ensure that the belt is neither too tight nor too loose.
Applying
1. Sit in the driver's seat so that your entire back is in contact with the backrest.
2. Pull the belt across your pelvis.
3. Snap the safety tab into the buckle.
Removing
Press the red button on the buckle.
3.2 Commissioning
Accident hazard! Do not use the wheel loader when the entire lighting system or individual functions are not
operational.
Equipment fault messages are indicated by the illuminated warning and indicator lights. All toggle switches are
switched on by switching downwards.
3.2.1 Lighting system
The lever activates 2 functions – lights and indicators. Check the
lights, indicators and horn before beginning every journey.
To Next Page
Loading...
