Page 19/84
December 2019W11/W12/W13 | Operation manual
3.2.2 Work spotlight (optional extra)
Accident hazard due to dazzled road users! Do not drive with the work spotlight switched on on public highways.
The wheel loader is equipped with work spotlights front and rear. The
work spotlights are switched on and off using the toggle switch below
the steering wheel.
3.2.3 Before starting the engine
Risk of injury! Check that nobody is on or near the wheel loader. Risk of injury due to slipping! Keep the controls of
the wheel loader clean and dry, otherwise you may slip and loose control of the wheel loader!
Accident hazard due to falling or loose, rolling objects! Remove or attach any loose items!
Accidents hazard due to poor visibility! Accident hazard due to missing protective devices! Ensure that all protective
devices are fitted and that all tools have been removed (following repairs) and the hood is closed.
1. Before starting the engine, carry out the "checks before entering" (see 3.1.2 "Entering").
2. Adjust the driver's seat and the steering column to your requirements.
3. Apply the safety belt.
3.2.4 Starting the engine
Risk of injury! Check that no one is in the wheel loader's danger zone!
Do not use flammable starting aids (for example, start pilot)!
Accident hazard! Only start the wheel loader from the driver's seat!
Ensure that the drive is in the neutral position (central position).
To Next Page
Loading...